FD 100/320Gbps NT and FX NT IHub Services Guide Virtual Private LAN ServiceIssue: 13 3HH-11985-AAAA-TQZZA 217exitspoke-sdp 2:22 createexitmesh-sdp 5:750 createexitmesh-sdp 7:750 createexitno shutdownexit...----------------------------------------------*A:ALA-3>config>service#5.9 Service Management TasksThis section discusses the following service management tasks:• Modifying VPLS Service and SAP Parameters• Enabling and Disabling VPLS Entities• Deleting a VPLS Service or SAP• Showing VPLS information• Clearing VPLS operational data• Showing VPLS SAP operational data• Clearing SAP statistics5.9.1 Modifying VPLS Service and SAP ParametersYou can change existing service and SAP parameters after the service or SAP iscreated. The changes are applied immediately.Some v-VPLS or m-VPLS parameters cannot be modified as long as the v-VPLS orm-VPLS exists. In order to change these parameters, you must remove the serviceand reconfigure with the new values. This includes the following service parameters:• service id• customer ID• VLAN IDFor some changes, the admin state of the service or SAP must be set down. If theadmin state is set down, then the operational state of the associated port shall godown and the state change shall propagate If an SAP is operationally down, no trafficshall be passed in control and data plane in the SAP and the correspondingforwarding database entries shall be flushed.The following displays a modified m-VPLS configuration.*A:ALA-1>configure>service>vpls# info----------------------------------------------description “This is a different description.”
