FD 100/320Gbps NT and FX NT IHub Services Guide Virtual Private Routed Network ServiceIssue: 13 3HH-11985-AAAA-TQZZA 4577.10.2.13 mtuTable 423 mtu command7.10.2.14 other-stateful-configurationTable 424 other-stateful-configuration command7.10.2.15 prefixTable 425 prefix commandItem DescriptionSyntax mtu mtu-bytesno mtuContext configure>service>vprn>router-advertisement>interfaceDescription This command configures the MTU for the nodes to use to send packets on the link.Default no mtu — The MTU option is not sent in the router advertisement messages.Parameter mtu-bytes — Specify the MTU for the nodes to use to send packets on the link.Values: 1500 — 2026Item DescriptionSyntax [no] other-stateful-configurationContext configure>service>vprn>router-advertisement>interfaceDescription This command sets the "Other configuration" flag. This flag indicates that DHCPv6lite isavailable for autoconfiguration of other (non-address) information such as DNS-relatedinformation or information on other servers in the network. See RFC 3736, Stateless DynamicHost Configuration Protocol (DHCP) for IPv6.Default no other-stateful-configurationItem DescriptionSyntax [no] prefix [ipv6-prefix/prefix-length]Context configure>service>vprn>router-advertisement>interfaceDescription This command configures an IPv6 prefix in the router advertisement messages. To supportmultiple IPv6 prefixes, use multiple prefix statements. No prefix is advertised until explicitlyconfigured using prefix statements.Default None(1 of 2)
