Virtual Private Routed Network Service506FD 100/320Gbps NT and FX NT IHub Services Guide3HH-11985-AAAA-TQZZA Issue: 137.10.9.15 exportTable 512 export command7.10.9.16 familyTable 513 family commandItem DescriptionSyntax export policy [policy...]no exportContext configure>service>vprn>bgpconfigure>service>vprn>bgp>groupconfigure>service>vprn>bgp>group>neighborconfigure>service>vprn>ripconfigure>service>vprn>rip>groupconfigure>service>vprn>rip>group>neighborDescription This command specifies the export policies to be used to control routes advertised to BGPneighbors.When multiple policy names are specified, the policies are evaluated in the order they arespecified. A maximum of five (5) policy names can be configured. The first policy that matchesis applied.Note that if a non-existent route policy is applied to a VPRN instance, the CLI generates awarning message. This message is only generated at an interactive CLI session and the routepolicy association is made. No warning message is generated when a non-existent route policyis applied to a VPRN instance in a configuration file or when SNMP is used.The no form of this command removes all route policy names from the export list.Default no export — BGP advertises routes from other BGP routes but does not advertise any routesfrom other protocols unless directed by an export policy.Parameters policy — A route policy statement name.Item DescriptionSyntax family [ipv4][ipv6]no familyContext configure>service>vprn>bgpconfigure>service>vprn>bgp>groupconfigure>service>vprn>bgp>group>neighborDescription This command configures the IP family capability.Parameters ipv4 — keyword, provisions IPv4 support.ipv6 — keyword, provisions IPv6 support.
