FD 100/320Gbps NT and FX NT IHub Services Guide Virtual Private LAN ServiceIssue: 13 3HH-11985-AAAA-TQZZA 3015.16.4.8 ccm-ltm-priorityTable 215 ccm-ltm-priority command5.16.4.9 low-priority-defectTable 216 low-priority-defect commandItem DescriptionSyntax ccm-ltm-priority priorityno ccm-ltm-priorityContext configure>service>vpls>sap>eth-cfm>mepconfigure>service>vpls>mesh-sdp>eth-cfm>mepconfigure>service>vpls>spoke-sdp>eth-cfm>mepconfigure>eth-ring>path>eth-cfm>mepDescription This command enables configuration of priority for CCM and LTM messagesDefault 7Parameters priority - Priority of the CCM/LTM MessageValue: 0...7Item DescriptionSyntax low-priority-defect { allDef | macRemErrXcon | remErrXcon | errXcon | xcon | noXcon}Context configure>service>vpls>sap>eth-cfm>mepconfigure>service>vpls>mesh-sdp>eth-cfm>mepconfigure>service>vpls>spoke-sdp>eth-cfm>mepconfigure>eth-ring>path>eth-cfm>mepDescription This command specifies the lowest priority defect that is allowed to generate a fault alarm.Default macRemErrXconParameters allDef - DefRDICCM, DefMACstatus, DefRemoteCCM, DefErrorCCM and DefXconCCMmacRemErrXcon - DefMACstatus, DefRemoteCCM, DefErrorCCM and DefXconCCMremErrXcon - DefRemoteCCM, DefErrorCCM and DefXconCCMerrXcon - DefErrorCCM and DefXconCCMxcon - DefXconCCMnoXcon - No defects DefXcon or lower are to be reported
