Virtual Private Routed Network Service514FD 100/320Gbps NT and FX NT IHub Services Guide3HH-11985-AAAA-TQZZA Issue: 137.10.9.28 med-outTable 525 med-out commandParameters drop-peer — Sends a notification to the remote peer and drops the session.discard-route — Discards routes received with loops in the AS path.ignore-loop — Ignores routes with loops in the AS path but maintains peering.off — Disables loop detection.Item Description(2 of 2)Item DescriptionSyntax med-out {number | igp-cost}no med-outContext configure>service>vprn>bgpconfigure>service>vprn>bgp>groupconfigure>service>vprn>bgp>group>neighborDescription This command enables advertising the Multi-Exit Discriminator (MED) and assigns the valueused for the path attribute for the MED advertised to BGP peers if the MED is not already set.The specified value can be overridden by any value set via a route policy.This configuration parameter can be set at three levels: global level (applies to all peers), grouplevel (applies to all peers in peer-group) or neighbor level (only applies to specified peer). Themost specific value is used.The no form of the command used at the global level reverts to default where the MED is notadvertised.The no form of the command used at the group level reverts to the value defined at the globallevel.The no form of the command used at the neighbor level reverts to the value defined at thegroup level.Default no med-outParameters number — The MED path attribute value, expressed as a decimal integer.Values: 0 — 4294967295igp-cost — The MED is set to the IGP cost of the given IP prefix.
