FD 100/320Gbps NT and FX NT IHub Services Guide Virtual Private Routed Network ServiceIssue: 13 3HH-11985-AAAA-TQZZA 5517.10.11.15 groupTable 592 group command7.10.11.16 neighborTable 593 neighbor commandParameters update — The RIP update timer value in seconds.Values: 1 — 600Default: 30timeout — The RIP timeout timer value in seconds.Values: 1 — 1200Default: 180flush — The RIP flush timer value in seconds.Values: 1 — 1200Default: 120Item Description(2 of 2)Item DescriptionSyntax [no] group group-nameContext configure>service>vprn>ripDescription This command creates a context for configuring a RIP group of neighbors. RIP groups are away of logically associating RIP neighbor interfaces to facilitate a common configuration for RIPinterfaces.The no form of the command deletes the RIP neighbor interface group. Deleting the group willalso remove the RIP configuration of all the neighbor interfaces currently assigned to thisgroup.Default no group — No group of RIP neighbor interfaces definedParameters group-name — The RIP group name. Allowed values are any string up to 32 characters longcomposed of printable, 7-bit ASCII characters. If the string contains special characters (#, $,spaces, etc.), the entire string must be enclosed within double quotes.Item DescriptionSyntax [no] neighbor ip-int-nameContext configure>service>vprn>rip>group(1 of 2)
