Virtual Private Routed Network Service592FD 100/320Gbps NT and FX NT IHub Services Guide3HH-11985-AAAA-TQZZA Issue: 13Table 651 routes command7.10.12.31 neighbourTable 652 neighbour commandTable 653 describes the neighbor command output fields.Table 653 Neighbor Output FieldsItem DescriptionSyntax routes [interface ip-int-name [ip-prefix/prefix-length]]Context show>router>dhcp6Description This command displays the routes for DHCP6.If no IP address or interface name is specified, then all configured routes are displayed.If an IP address or interface name is specified, then only data regarding the specified route isdisplayed.Parameters ip-int-name — Displays statistics for the specified IP interface.ipv6-address/prefix-length — Specifies the IPv6 address on the interface.Values: ipv6-address/prefix: ipv6-address x:x:x:x:x:x:x:x (eight 16-bit pieces)x:x:x:x:x:x:d.d.d.dx [0 — FFFF]Hd [0 — 255]Dprefix-length 1 — 64Item DescriptionSyntax neighbor [ip-address | ip-int-name | mac ieee-mac-address | summary]Context show>routerDescription This command displays information about the IPv6 neighbor cache.Parameters ip-address — Specify the IP interface name.ip-int-name — Specify the address of the IPv6 interface address.mac ieee-mac-address — Specify the MAC address.summary — Displays summary neighbor information.Label DescriptionIPv6 Address Displays the IPv6 address.(1 of 2)
