190-02177-00 Rev. A Garmin G1000 NXi Pilot’s Guide for Cessna Nav IIISYSTEMOVERVIEW FLIGHTINSTRUMENTS EIS AUDIO PANEL& CNS FLIGHTMANAGEMENT HAZARDAVOIDANCE AFCS ADDITIONALFEATURES APPENDICES INDEX127FLIGHT MANAGEMENTWhen the Map Pointer is placed on an object, the name of the object is highlighted (even if the name wasnot originally displayed on the map). When any map feature or object is selected on the map display, pertinentinformation is displayed.Figure 5-10 Navigation Map - Map Pointer on Point of InterestMap Pointer onPOIInformation about Pointof InterestWhen the Map Pointer crosses an airspace boundary, the boundary is highlighted and airspace informationis shown. The information includes the name and class of airspace, the ceiling in feet above Mean Sea Level(MSL), and the floor in feet MSL.Reviewing information for an airport, NAVAID, or user waypoint:1) Place the Map Pointer on a waypoint.2) Press the ENT Key to display the Waypoint Information Page for the selected waypoint.3) Select the Go Back Softkey, the CLR Key, or the ENT Key to exit the Waypoint Information Page and return tothe Navigation Map showing the selected waypoint.Viewing airspace information for a special-use or controlled airspace:1) Place the Map Pointer on the boundary of an airspace.2) Push the Joystick to remove the Map Pointer and center the map on the aircraft.Or:1) Place the Map Pointer on an open area within the boundaries of an airspace.2) Press the ENT Key to display an options menu.3) ‘Review Airspaces’ should already be highlighted, if not select it. Press the ENT Key to display the AirspaceInformation Page for the selected airspace.4) Press the CLR or ENT Key to exit the Airspace Information Page.
