190-02177-00 Rev. A Garmin G1000 NXi Pilot’s Guide for Cessna Nav IIISYSTEMOVERVIEW FLIGHTINSTRUMENTS EIS AUDIO PANEL& CNS FLIGHTMANAGEMENT HAZARDAVOIDANCE AFCS ADDITIONALFEATURES APPENDICES INDEX181FLIGHT MANAGEMENTCreating a stored flight plan:1) From the MFD, press the FPL Key.2) Turn the small FMS Knob clockwise to display the Flight Plan Catalog Page.3) Select the New Softkey; or press the MENU Key, highlight ‘Create New Flight Plan’, and press the ENT Key todisplay a blank flight plan for the first empty storage location.4) Select the origin airport and runway.a) Highlight the origin airport identifier using the FMS Knob.b) Use the FMS Knob or the waypoint submenu to enter the identifier, facility, or city name of the originwaypoint.c) Press the ENT Key. The Set Runway Window is displayed with the Runway field highlighted.d) Turn the small FMS Knob to select the runway, and press the ENT Key.e) Press the ENT Key again to add the origin airport/runway to the flight plan.5) Repeat step number 4 for the destination airport and runway.6) Select the enroute waypoints.a) Highlight the location to insert the waypoint using the FMS Knob (If the enroute header is selected, thenew waypoint is placed following the header. If an enroute waypoint or the dashes are selected, the newwaypoint will be placed ahead of the selected item.)b) Use the FMS Knob or the waypoint submenu to enter the identifier, facility, or city name of the waypoint.c) Press the ENT Key. The stored flight plan is modified as each waypoint is entered.7) Repeat step number 6 to enter each additional enroute waypoint.8) When all waypoints have been entered, press the FMS Knob to remove the cursor.
