Garmin G1000 NXi Pilot’s Guide for Cessna Nav III 190-02177-00 Rev. ASYSTEMOVERVIEWFLIGHTINSTRUMENTSEISAUDIO PANEL& CNSFLIGHTMANAGEMENTHAZARDAVOIDANCEAFCSADDITIONALFEATURESAPPENDICESINDEX146FLIGHT MANAGEMENTIf duplicate entries exist for the entered facility name or location, additional entries may be viewed by continuingto turn the small FMS Knob during the selection process. If duplicate entries exist for an identifier, a DuplicateWaypoints Window is displayed when the ENT Key is pressed.Figure 5-25 Waypoint Information Window - Duplicate IdentifierDuplicate MessageIdentifier withDuplicatesDuplicateWaypointsAIRPORTSNOTE: ‘North Up’ orientation on the Airport Information Page cannot be changed; the pilot needs to beaware of proper orientation if the Navigation Map orientation is different from the Airport Information PageMap.The Airport Information Page is the first page in WPT group and allows the pilot to view airport information,load frequencies (COM, NAV, and lighting), review runways, and review instrument procedures that may beinvolved in the flight plan. See the Audio Panel and CNS Section for more information on loading frequencies(auto-tuning). After engine startup, the Airport Information Page defaults to the airport where the aircraft islocated. After a flight plan has been loaded, it defaults to the destination airport. On a flight plan with multipleairports, it defaults to the airport which is the current active waypoint.
