Garmin G1000 NXi Pilot’s Guide for Cessna Nav III 190-02177-00 Rev. ASYSTEMOVERVIEWFLIGHTINSTRUMENTSEISAUDIO PANEL& CNSFLIGHTMANAGEMENTHAZARDAVOIDANCEAFCSADDITIONALFEATURESAPPENDICESINDEX164FLIGHT MANAGEMENT1) Press the FMS Knob to activate the cursor.2) Enter a user waypoint name (up to six characters).3) Press the ENT Key. The message ‘Are you sure you want to create the new User Waypoint AAAAAA?’ isdisplayed.4) With ‘YES’ highlighted, press the ENT Key.5) If desired, define the type and location of the waypoint in one of the following ways:Select “RAD/RAD” using the small FMS Knob, press the ENT Key, and enter the two reference waypointidentifiers and radials into the Reference Waypoints window using the FMS Knobs.Or:Select “RAD/DIS” using the small FMS Knob, press the ENT Key, and enter the reference waypoint identifier,the radial, and the distance into the Reference Waypoints window using the FMS Knobs.Or:Select “LAT/LON” using the small FMS Knob, press the ENT Key, and enter the latitude and longitude intothe Information window using the FMS Knobs.6) Press the ENT Key to accept the new waypoint.7) If desired, change the storage method of the waypoint to temporary by moving the cursor to “Temporary” andselecting the ENT Key to check the box.8) Press the FMS Knob to remove the flashing cursor.Creating user waypoints from map pages:1) Push the Joystick to activate the panning function and pan to the map location of the desired user waypoint.2) Press the ENT Key. The User Waypoint Information Page is displayed with the captured position.NOTE: If the pointer has highlighted a map database feature, one of three things happens upon pressingthe ENT Key: 1) information about the selected feature is displayed instead of initiating a new waypoint,2) a menu pops up allowing a choice between ‘Review Airspaces’ or ‘Create User Waypoint’, or 3) a newwaypoint is initiated with the default name being the selected map item.3) Enter a user waypoint name (up to six characters).4) Press the ENT Key to accept the selected name. The first reference waypoint box is highlighted.
