190-02177-00 Rev. A Garmin G1000 NXi Pilot’s Guide for Cessna Nav IIISYSTEMOVERVIEW FLIGHTINSTRUMENTS EIS AUDIO PANEL& CNS FLIGHTMANAGEMENT HAZARDAVOIDANCE AFCS ADDITIONALFEATURES APPENDICES INDEX235FLIGHT MANAGEMENTSelecting automatic or manual page mode:Press the Auto Softkey or the Manual Softkey; or press the MENU Key, highlight ‘Auto Mode’ or ‘ManualMode’, and press the ENT Key.Selecting flight plan or waypoint mode:Press the FPL Softkey or the WPTs Softkey; or press the MENU Key, highlight ‘Flight Plan Mode’ or ‘WaypointsMode’, and press the ENT Key.Selecting a flight plan and leg for trip statistics:1) Press the FMS Knob to activate the cursor in the flight plan number field.2) Turn the small FMS Knob to select the desired flight plan number.3) Turn the large FMS Knob to highlight ‘CUM’ or ‘REM’. The statistics for each leg can be viewed by turning thesmall FMS Knob to select the desired leg. The Inset Map also displays the selected data.Selecting waypoints for waypoint mode:1) Select the WPTs Softkey; or press the MENU Key, highlight ‘Waypoints Mode’, and press the ENT Key. Thecursor is positioned in the waypoint field directly below the FPL field.2) Turn the FMS knobs to select the desired waypoint (or select from the Page Menu ‘Set WPT to Present Position’if that is what is desired), and press the ENT Key. The cursor moves to the second waypoint field.3) Turn the FMS knobs to select the desired waypoint, and press the ENT Key. The statistics for the selected legare displayed.In manual page mode, the other eight trip input data fields must be entered by the pilot, in addition to flightplan and leg selection.Entering manual data for trip statistics calculations:1) Select the Manual Softkey or select ‘Manual Mode’ from the Page Menu, and press the ENT Key. The cursormay now be positioned in any field in the top right two boxes.2) Turn the FMS Knobs to move the cursor onto the Departure Time field and enter the desired value. Press theENT Key. The statistics are calculated using the new value and the cursor moves to the next entry field. Repeatuntil all desired values have been entered.
