Garmin G1000 NXi Pilot's Manual

Also see for G1000 NXi: Cockpit reference guide Supplemental Maintenance Manual Cockpit reference guide Reference guide Pilot's guide

Contents

Garmin G1000 NXi Pilot’s Guide for the Cessna Nav III 190-02177-00 Rev. ASYSTEMOVERVIEWFLIGHTINSTRUMENTSEISAUDIO PANEL& CNSFLIGHTMANAGEMENTHAZARDAVOIDANCEAFCSADDITIONALFEATURESAPPENDICESINDEX428APPENDIX AMessage CommentsSURFACEWATCH DISABLED - Toofar north/south.The SurfaceWatch system has been disabled.SURFACEWATCH FAIL - Invalidaudio configuration.The SurfaceWatch system has failed due to an invalid audio configuration.SURFACEWATCH FAIL - Invalidconfigurable alerts.The SurfaceWatch system has failed due to invalid configurable alerts.SURFACEWATCH FAIL - One ormore inputs invalid.The SurfaceWatch system has failed due to one or more invalid inputs.SURFACEWATCH INHIBITED -Surfacewatch inhibited.The SurfaceWatch system has been inhibited.SVT DISABLED – Out of availableterrain region.Synthetic Vision is disabled because the aircraft is not within the boundaries of theinstalled terrain database.SVT DISABLED – Terrain DBresolution too low.Synthetic Vision is disabled because a terrain database of sufficient resolution (4.9 arc-second or better) is not currently installed.SW MISMATCH – GDU softwareversion mismatch. Xtalk is off.The MFD and PFD have different software versions installed. The system should beserviced.TERRAIN AUD CFG – Trn Awarenessaudio config error. Service req’d.TAWS is disabled because the audio configuration is invalid. The system should beserviced.TERRAIN DISABLED – TerrainAwareness DB resolution too low.TAWS is disabled because a terrain database of sufficient resolution (4.9 arc-second orbetter) is not currently installed.TIMER EXPIRD – Timer has expired. The system notifies the pilot that the timer has expired.TRAFFIC FAIL – Traffic device hasfailed.The system is no longer receiving data from the traffic system. The traffic deviceshould be serviced.TRN AUD FAIL – Trn Awarenessaudio source unavailable Terrain Awareness audio is unavailable. The system should be serviced.UNABLE V WPT – Can’t reach currentvertical waypoint.The current vertical waypoint can not be reached within the maximum flight pathangle and vertical speed constraints. The system automatically transitions to the nextvertical waypoint.VNV – Unavailable. Excessivecrosstrack error. The current crosstrack exceeds the limit, causing vertical deviation to go invalid.VNV – Unavailable. Excessive trackangle error.The current track angle error exceeds the limit, causing the vertical deviation to goinvalid.VNV – Unavailable. Parallel courseselected. A parallel course has been selected, causing the vertical deviation to go invalid.VNV – Unavailable. Unsupported legtype in flight plan.The lateral flight plan contains a procedure turn, vector, or other unsupported legtype prior to the active vertical waypoint. This prevents vertical guidance to the activevertical waypoint.