190-02177-00 Rev. A Garmin G1000 NXi Pilot’s Guide for Cessna Nav IIISYSTEMOVERVIEW FLIGHTINSTRUMENTS EIS AUDIO PANEL& CNS FLIGHTMANAGEMENT HAZARDAVOIDANCE AFCS ADDITIONALFEATURES APPENDICES INDEX191FLIGHT MANAGEMENTLoading a departure procedure into a stored flight plan:1) Select a stored flight plan from the Flight Plan Catalog Page.2) Select the Edit Softkey; or press the MENU Key, select ‘Edit Flight Plan’, and press the ENT Key. The StoredFlight Plan Page is displayed.3) Select the LD DP Softkey; or press the MENU Key, select “Load Departure”, and press the ENT Key. TheDeparture Loading Page is displayed.4) Select a departure. Press the ENT Key.5) Select a runway served by the selected departure, if required. Press the ENT Key.6) Select a transition for the selected departure. Press the ENT Key.7) Press the ENT Key to load the selected departure procedure.Figure 5-57 Departure Loading Page - Selecting TransitionDeparture AirportSelectedDepartureDeparture TransitionPoints AvailableSelected RunwaySelectedDeparture EndPointPreview ofSelectedDeparture Selected Transition
