Garmin G1000 NXi Pilot's Manual

Also see for G1000 NXi: Cockpit reference guide Supplemental Maintenance Manual Cockpit reference guide Reference guide Pilot's guide

Contents

Garmin G1000 NXi Pilot’s Guide for Cessna Nav III 190-02177-00 Rev. ASYSTEMOVERVIEWFLIGHTINSTRUMENTSEISAUDIO PANEL& CNSFLIGHTMANAGEMENTHAZARDAVOIDANCEAFCSADDITIONALFEATURESAPPENDICESINDEX200FLIGHT MANAGEMENT1) Press the FPL Key to display the Active Flight Plan Page.2) Turn the small FMS Knob clockwise one click to display the Flight Plan Catalog Page.3) Press the FMS Knob to activate the cursor and turn the FMS Knob to highlight the flight plan to be edited.4) Select the Edit Softkey; or press the MENU Key, select ‘Edit Flight Plan’ and press the ENT Key. The StoredFlight Plan Page is displayed.5) Press the MENU Key to display the Page Menu and turn the FMS Knob to highlight ‘Remove ’.6) Press the ENT Key. The ‘Remove from flight plan?’ window is displayed.7) With ‘OK’ highlighted, press the ENT Key. To cancel the request, press the CLR Key, or highlight ‘CANCEL’ andpress the ENT Key.8) Press the FMS Knob to remove the flashing cursor.CHANGING FLIGHT PLAN COMMENTS (NAMES)The comment field (or name) of each flight plan can be changed to something that is useful for identificationand sorting.Changing the active flight plan comment:1) Press the FPL Key to display the Active Flight Plan Page.2) Press the FMS Knob to activate the cursor and turn the large FMS Knob to highlight the comment field.3) Use the FMS Knobs to edit the comment.4) Press the ENT Key to accept the changes.5) Press the FMS Knob to remove the flashing cursor.Changing a stored flight plan comment:1) Press the FPL Key to display the Active Flight Plan Page.2) Turn the small FMS Knob clockwise one click to display the Flight Plan Catalog Page.3) Press the FMS Knob to activate the cursor and turn the FMS Knob to highlight the flight plan to be edited.4) Select the Edit Softkey; or press the MENU Key, select ‘Edit Flight Plan’ and press the ENT Key. The StoredFlight Plan Page is displayed.5) Turn the large FMS Knob to highlight the comment field.6) Use the FMS Knobs to edit the comment.7) Press the ENT Key to accept the changes.8) Press the FMS Knob to remove the flashing cursor.