Garmin G1000 NXi Pilot’s Guide for Cessna NAV III190-02177-00 Rev. ASYSTEMOVERVIEW FLIGHTINSTRUMENTS EIS AUDIO PANEL& CNS FLIGHTMANAGEMENT HAZARDAVOIDANCE AFCS ADDITIONALFEATURES APPENDICES INDEX389ADDITIONAL FEATURESTERMINAL PROCEDURES CHARTSSelecting Terminal Procedures Charts:While viewing the Navigation Map Page, Nearest Airport Page, or Flight Plan Page, select the Charts Softkey.Or:1) Press the MENU Key to display the Page Menu.2) Turn the large FMS Knob to scroll through the Options Menu to Charts.3) Press the ENT Key to display the chart.Navigation Map Page Options Menu Waypoint Airport Information Page Options MenuFigure 8-17 Option MenusOn the Waypoint Airport Information Page Options Menu, select the desired chart and press the ENT Keyto display the chart.When no terminal procedure chart is available, the banner CHART Not Available appears on the screen.The CHART Not Available banner does not refer to the FliteCharts subscription, but rather the availability ofa particular airport chart selection or procedure for a selected airport.Figure 8-18 Chart Not Available BannerIf there is a problem in rendering the data (such as a data error or a failure of an individual chart), thebanner UNABLE TO DISPLAY CHART is then displayed.Figure 8-19 Unable To Display Chart BannerWhen a chart is not available by selecting the Charts Softkey or selecting a Page Menu Option, charts maybe obtained for other airports from the WPT Pages or Flight Plan Pages.
