Garmin G1000 NXi Pilot’s Guide for Cessna Nav III 190-02177-00 Rev. ASYSTEMOVERVIEWFLIGHTINSTRUMENTSEISAUDIO PANEL& CNSFLIGHTMANAGEMENTHAZARDAVOIDANCEAFCSADDITIONALFEATURESAPPENDICESINDEX220FLIGHT MANAGEMENTARRIVALSA Standard Terminal Arrival (STAR) can be loaded at any airport that has one available. Only one arrivalcan be loaded at a time in a flight plan. If an arrival is loaded when another arrival is already in the activeflight plan, the new arrival replaces the previous arrival. The route is defined by selection of an arrival, thetransition waypoints, and a runway.LOADING AN ARRIVAL INTO THE ACTIVE FLIGHT PLANLoading an arrival into the active flight plan using the PROC Key:1) Press the PROC Key. The Procedures Window is displayed.2) Highlight ‘Select Arrival’.3) Press the ENT Key. The Arrival Loading Page is displayed.4) Use the FMS Knob to select an airport, if necessary, and press the ENT Key.5) Select an arrival from the list and press the ENT Key.6) Select a transition (if required) and press the ENT Key.7) Select a runway (if required) and press the ENT Key. ‘Load?’ is highlighted.8) Press the ENT Key to load the arrival procedure.Figure 5-74 Arrival SelectionDestination AirportArrival PreviewAvailable Procedure ActionsArrival ChoicesLoaded Procedures
