190-02177-00 Rev. A Garmin G1000 NXi Pilot’s Guide for Cessna Nav IIISYSTEMOVERVIEW FLIGHTINSTRUMENTS EIS AUDIO PANEL& CNS FLIGHTMANAGEMENT HAZARDAVOIDANCE AFCS ADDITIONALFEATURES APPENDICES INDEX149FLIGHT MANAGEMENTSelecting an airport for review by identifier, facility name, or location:1) From the Airport Information Page, press the FMS Knob.2) Use the FMS Knobs and enter an identifier, facility name, or location.3) Press the ENT Key.4) Press the FMS Knob to remove the cursor.Selecting a runway:1) With the Airport Information Page 1 displayed, press the FMS Knob to activate the cursor.2) Turn the large FMS Knob to place the cursor in the ‘Runways’ Box, on the runway designator.3) Turn the small FMS Knob to display the desired runway (if more than one) for the selected airport.4) To remove the flashing cursor, press the FMS Knob.Viewing a destination airport:From the Airport Information Page press the MENU Key. Select ‘View Destination Airport’. The DestinationAirport is displayed.The Airport Frequencies Box uses the descriptions and abbreviations listed in the following table:Communication Frequencies Navigation FrequenciesApproach *Arrival *ASOSATISAWOSCenterClass B *Class C *ClearanceControlCTA *Departure *GateGroundHelicopterMulticomOtherPre-TaxiRadarRampTerminal *TMA *TowerTRSA *UnicomILSLOC* May include Additional InformationTable 5-6 Airport Frequency AbbreviationsA departure, arrival, or approach can be loaded using the softkeys on the Airport Information Page. See theProcedures section for details. METARs or TAFs applicable to the selected airport can be selected for display (seethe Hazard Avoidance section for details about weather).
