190-02177-00 Rev. A Garmin G1000 NXi Pilot’s Guide for the Cessna Nav IIISYSTEMOVERVIEW FLIGHTINSTRUMENTS EIS AUDIO PANEL& CNS FLIGHTMANAGEMENT HAZARDAVOIDANCE AFCS ADDITIONALFEATURES APPENDICES INDEX259HAZARD AVOIDANCEFigure 6-14 Weather Data Link (FIS-B) Page Setup MenuFigure 6-13 Weather Data Link(FIS-B) Page MenuEnables/disablesNEXRAD data display forthe continental UnitedStatesEnables/disablesregional NEXRADdata displayDisplaying the NEXRAD weather product on the Navigation Map Page:1) Select the Map Opt Softkey.2) Select the NEXRAD Softkey.3) To change the type of NEXRAD displayed, press the MENU Key.4) With ‘Map Settings’ highlighted, press the ENT Key.5) Turn the small FMS Knob to select the ‘Weather’ Group, then press the ENT Key.6) Turn the large FMS Knob to highlight the NEXRAD Data Region field.7) Turn the small FMS Knob to highlight ‘CONUS’ (continental United States), ‘RGNL’ (regional), or ‘Combined’,then press the ENT Key. This selection also affects display of NEXRAD on the PFD Maps.8) When finished, press the FMS Knob or press the CLR Key.Displaying the NEXRAD weather product on PFD maps:1) Press the Map/HSI Softkey (in TCAS II installations, press the Map Opt Softkey).2) Press the NEXRAD Softkey to enable/disable the display of NEXRAD information.The regional NEXRAD weather product coverage area varies, as it is determined by the data received fromground-based sources. When the regional NEXRAD weather product is enabled, a white spiked boundaryencloses this area to indicate the geographic limits of the regional NEXRAD coverage being displayed. Thesystem shows composite radar data from all available NEXRAD sites inside of this boundary area.
