190-02177-00 Rev. A Garmin G1000 NXi Pilot’s Guide for Cessna Nav IIISYSTEMOVERVIEW FLIGHTINSTRUMENTS EIS AUDIO PANEL& CNS FLIGHTMANAGEMENT HAZARDAVOIDANCE AFCS ADDITIONALFEATURES APPENDICES INDEX173FLIGHT MANAGEMENTFigure 5-45 Direct-to Window - PFDDirect-to Point Info- Identifier/Symbol/City- Facility NameActivation CommandDirect-to Point Info- Bearing/Distance- Desired CourseVNV Constraints- Altitude at Arrival- Along Track OffsetAny waypoint can be entered as a direct-to destination from the Direct-to Window.Entering a waypoint identifier, facility name, or city as a direct-to destination:1) Press the Direct-to Key. The Direct-to Window is displayed (with the active flight plan waypoint as the defaultselection or a blank waypoint field if no flight plan is active).2) Turn the small FMS Knob clockwise to begin entering a waypoint identifier (turning it counter-clockwise bringsup the waypoint selection submenu - press the CLR Key to remove it), or turn the large FMS Knob to select thefacility name, or city field and turn the small FMS Knob to begin entering a facility name or city. If duplicateentries exist for the entered facility or city name, additional entries can be viewed by turning the small FMSKnob during the selection process.3) Press the ENT Key. The ‘Activate?’ field is highlighted.4) Press the ENT Key to activate the direct-to.Any waypoint contained in the active flight plan can be selected as a direct-to waypoint from the Direct-toWindow, the Active Flight Plan Page, or the Active Flight Plan Window.Figure 5-46 Waypoint SubmenuWaypoint Submenu- Flight Plan Waypoints- Nearest Airports- Recent Waypoints- User Waypoints
