190-02177-00 Rev. A Garmin G1000 NXi Pilot’s Guide for Cessna Nav IIISYSTEMOVERVIEW FLIGHTINSTRUMENTS EIS AUDIO PANEL& CNS FLIGHTMANAGEMENT HAZARDAVOIDANCE AFCS ADDITIONALFEATURES APPENDICES INDEX139FLIGHT MANAGEMENTADDITIONAL NAVIGATION MAP ITEMSNavigation maps can display some additional items. These items (e.g. selected altitude intercept arc, trackvector, wind vector, fuel range ring, and SVT field of view) can be displayed/removed individually.Setting up additional ‘Map’ group items:1) Press the MENU Key with the Navigation Map Page displayed. The cursor flashes on the ‘Map Settings’ option.2) Press the ENT Key. The Map Settings Menu is displayed.3) Turn the small FMS Knob to select the ‘Map’ group.4) Press the ENT Key. The cursor flashes on the first field.5) Turn the large FMS Knob to select the desired option.6) Turn the small FMS Knob to select ‘On’ or ‘Off’.Or:If it is a data field, use the FMS Knob to select the range or time value.7) Press the ENT Key to accept the selected option and move the cursor to the next item.8) Repeat steps 5-7 as necessary.9) Press the FMS Knob to return to the Navigation Map Page.SELECTED ALTITUDE INTERCEPT ARCThe map can display the location along the current track where the aircraft will intercept the selectedaltitude. The location will be shown as a cyan arc when the aircraft is actually climbing or descending.Figure 5-16 Navigation Map - Range to Altitude ArcSelectedAltitudeIntercept Arc
