Garmin G1000 NXi Pilot's Manual

Also see for G1000 NXi: Cockpit reference guide Supplemental Maintenance Manual Cockpit reference guide Reference guide Pilot's guide

Contents

Garmin G1000 NXi Pilot’s Guide for Cessna Nav III 190-02177-00 Rev. ASYSTEMOVERVIEWFLIGHTINSTRUMENTSEISAUDIO PANEL& CNSFLIGHTMANAGEMENTHAZARDAVOIDANCEAFCSADDITIONALFEATURESAPPENDICESINDEX174FLIGHT MANAGEMENTSelecting an active flight plan waypoint as a direct-to destination:1) While navigating an active flight plan, press the Direct-to Key. The Direct-to Window is displayed with theactive flight plan waypoint as the default selection.2) Turn the small FMS Knob counter-clockwise to display a list of flight plan waypoints (the FPL list is populatedonly when navigating a flight plan).3) Select the desired waypoint.4) Press the ENT Key. The cursor is now displayed on ‘Activate?’.5) Press the ENT Key again to activate the direct-to.Or:1) Select the Active Flight Plan Page on the MFD, or the Active Flight Plan Window on the PFD.2) Select the desired waypoint.3) Press the Direct-to Key.4) Press the ENT Key. The cursor is now displayed on ‘Activate?’.5) Press the ENT Key again to activate the direct-to.Any Nearest, Recent or User waypoint can be selected as a direct-to destination in the Direct-to Window.Selecting a Nearest, Recent or User waypoint as a direct-to destination:1) Press the Direct-to Key. The Direct-to Window is displayed (with the active flight plan destination as thedefault selection or a blank destination if no flight plan is active).2) Turn the small FMS Knob counter-clockwise to display a list of flight plan waypoints (the FPL list is populatedonly when navigating a flight plan).3) Turn the small FMS Knob clockwise to display the Nearest, Recent or User waypoints.4) Turn the large FMS Knob clockwise to select the desired waypoint.5) Press the ENT Key. The cursor is now displayed on ‘Activate?’.6) Press the ENT Key again to activate the direct-to.The Direct-to Window can be displayed from any page and allows selection and activation of direct-to navigation.If the direct-to is initiated from any page except the WPT pages, the default waypoint is the active flight planwaypoint (if a flight plan is active) or a blank waypoint field. Direct-to requests on any WPT page defaults to thedisplayed waypoint.Selecting any waypoint as a direct-to destination:1) Select the page or window containing the desired waypoint type and select the desired waypoint.2) Press the Direct-to Key to display the Direct-to Window with the selected waypoint as the direct-to destination.3) Press the ENT Key. The cursor is now displayed on ‘Activate?’.4) Press ENT again to activate the direct-to.