190-02177-00 Rev. A Garmin G1000 NXi Pilot’s Guide for Cessna Nav IIISYSTEMOVERVIEW FLIGHTINSTRUMENTS EIS AUDIO PANEL& CNS FLIGHTMANAGEMENT HAZARDAVOIDANCE AFCS ADDITIONALFEATURES APPENDICES INDEX165FLIGHT MANAGEMENT5) If desired, define the type and location of the waypoint in one of the following ways:Select “RAD/RAD” using the small FMS Knob, press the ENT Key, and enter the two reference waypointidentifiers and radials into the Reference Waypoints window using the FMS Knobs.Or:Select “RAD/DIS” using the small FMS Knob, press the ENT Key, and enter the reference waypoint identifier,the radial, and the distance into the Reference Waypoints window using the FMS Knobs.Or:Select “LAT/LON” using the small FMS Knob, press the ENT Key, and enter the latitude and longitude intothe Information window using the FMS Knobs.6) Press the ENT Key to accept the new waypoint.7) If desired, change the storage method of the waypoint to temporary by moving the cursor to “Temporary” andselecting the ENT Key to check or uncheck the box.8) Press the FMS Knob to remove the flashing cursor.9) Press the Go Back Softkey to return to the map page.EDITING USER WAYPOINTSEditing a user waypoint comment or location:1) With the User Waypoint Information Page displayed, press the FMS Knob to activate the cursor.2) Select a user waypoint in the User Waypoint List, if required, and press the ENT Key.3) Move the cursor to the desired field.4) Turn the small FMS Knob to make any changes.5) Press the ENT Key to accept the changes.6) Press the FMS Knob to remove the flashing cursor.
