Garmin G1000 NXi Pilot’s Guide for the Cessna Nav III 190-02177-00 Rev. ASYSTEMOVERVIEWFLIGHTINSTRUMENTSEISAUDIO PANEL& CNSFLIGHTMANAGEMENTHAZARDAVOIDANCEAFCSADDITIONALFEATURESAPPENDICESINDEX328HAZARD AVOIDANCEFigure 6-75 Traffic Map PageTraffic DisplayRange RingsAIRB Application OnOther Non-ThreatTraffic, 1000 below,climbingTraffic Advisory,200’ above,climbingNo-bearingTraffic Advisory,4.0 nm away,1100’ above,descendingProximityAdvisory, 1200’feet below,descendingEnabling/disabling the display of ADS-B traffic:1) Select the Traffic Map Page.2) Select the ADS-B Softkey.Or:a) Press the MENU Key and turn the small FMS Knob to highlight ‘ADS-B On’ or ‘ADS-B Off’.b) Press the ENT Key.Testing the display of ADS-B traffic:1) Select the Traffic Map Page.2) If necessary, turn the Joystick to select a map range of 2 and 6 nm to ensure full test pattern display.3) Ensure the ADS-B Softkey is disabled.4) If the optional TAS is installed, ensure the TAS STBY Softkey is enabled.5) Press the Test Softkey.Or:a) Press the MENU Key.b) Turn the small FMS Knob to highlight ‘Test Mode’.c) Press the ENT Key.
