Garmin G1000 NXi Pilot’s Guide for Cessna Nav III 190-02177-00 Rev. ASYSTEMOVERVIEWFLIGHTINSTRUMENTSEISAUDIO PANEL& CNSFLIGHTMANAGEMENTHAZARDAVOIDANCEAFCSADDITIONALFEATURESAPPENDICESINDEX194FLIGHT MANAGEMENTLoading an approach procedure into a stored flight plan:1) Select a stored flight plan from the Flight Plan Catalog Page.2) Press the Edit Softkey; or press the MENU Key, select ‘Edit Flight Plan’, and press the ENT Key. The StoredFlight Plan Page is displayed.3) Press the LD APR Softkey; or press the MENU Key, select “Load Approach”, and press the ENT Key. TheApproach Loading Page is displayed.4) Select the airport and approach:a) Use the FMS Knob to select an airport and press the ENT Key.b) Select an approach from the list and press the ENT Key.Or:a) If necessary, push the FMS Knob to exit the approach list, and use the large FMS Knob to move the cursorto the Approach Channel field.b) Use the FMS Knob to enter the approach channel number, and press the ENT Key to accept the approachchannel number. The airport and approach are selected.5) Select a transition for the selected approach. Press the ENT Key.6) Press the ENT Key to load the selected approach procedure.Figure 5-61 Approach Loading Page - Selecting the TransitionDestination AirportSelectedApproachTransitions Available withSelected ApproachApproach WaypointSequencePreview ofSelectedApproachSelected Transition
