Operation Manual – VLANH3C S3100 Series Ethernet Switches Chapter 2 VLAN Configuration2-6Note:z To convert a Trunk port into a Hybrid port (or vice versa), you need to use theAccess port as a medium. For example, the Trunk port has to be configured as anAccess port first and then a Hybrid port.z The default VLAN IDs of the Trunk ports on the local and peer devices must be thesame. Otherwise, packets cannot be transmitted properly.2.2.4 Displaying and Maintaining Port-Based VLANTo do… Use the command… RemarksDisplay the hybrid or trunkportsdisplay port { hybrid |trunk } Available in any view.2.2.5 Port-Based VLAN Configuration ExampleI. Network requirementsz As shown in Figure 2-1, Switch A and Switch B each connect to a server and aworkstation (Host).z For data security concerns, the two servers are assigned to VLAN 101 with thedescriptive string being “DMZ”, and the PCs are assigned to VLAN 201.z The devices within each VLAN can communicate with each other but that indifferent VLANs cannot communicate with each other directly.II. Network diagramServerEth1/0/12Eth1/0/11Eth1/0/10Eth1/0/1 Eth1/0/2Eth1/0/3Server HostHostVLAN101 VLAN201SwitchASwitchBFigure 2-1 Network diagram for VLAN configurationIII. Configuration procedurez Configure Switch A.
