Operation Manual – FTP-SFTP-TFTPH3C S3100 Series Ethernet Switches Chapter 1 FTP and SFTP Configuration1-2data transmission. In addition, since the switch can be used as a client, you can log in toremote devices to transfer files securely.1.2 FTP ConfigurationTable 1-2 FTP configuration tasksItem Configuration task DescriptionCreating an FTP user RequiredEnabling an FTP server RequiredConfiguring connection idle time OptionalDisconnecting a specified user OptionalConfiguring the banner for an FTPserver OptionalFTP Configuration: A SwitchOperating as an FTP ServerDisplaying FTP server information OptionalFTP Configuration: A SwitchOperating as an FTP ClientBasic configurations on an FTPclient —1.2.1 FTP Configuration: A Switch Operating as an FTP ServerI. Creating an FTP userConfigure the user name and password for the FTP user and set the service type toFTP. To use FTP services, a user must provide a user name and password for beingauthenticated by the FTP server. Only users that pass the authentication have accessto the FTP server.Table 1-3 Create an FTP userOperation Command DescriptionEnter system view system-view —Add a local user and enterlocal user view local-user user-nameRequiredBy default, no local user isconfigured.Configure a password forthe specified userpassword { simple |cipher } passwordOptionalBy default, no password isconfigured.Configure the service typeas FTP service-type ftpRequiredBy default, no service isconfigured.