Operation Manual – AAAH3C S3100 Series Ethernet Switches Chapter 2 AAA Configuration2-302.3.7 Configuring the Timers Regarding TACACS ServersTable 2-30 Configure the timers regarding TACACS serversOperation Command RemarksEnter system view system-view —Create a HWTACACSscheme and enter its viewhwtacacs schemehwtacacs-scheme-nameRequiredBy default, noHWTACACS schemeexists.Set the response timeouttime of TACACS serverstimer response-timeoutsecondsOptionalBy default, the responsetimeout time is fiveseconds.Set the time that theswitch must wait before itcan restore the status ofthe primary server toactivetimer quiet minutesOptionalBy default, the switchmust wait five minutesbefore it can restore thestatus of the primaryserver to active.Set the real-timeaccounting intervaltimerrealtime-accountingminutesOptionalBy default, the real-timeaccounting interval is 12minutes.Caution:z To control the interval at which users are charge in real time, you can set thereal-time accounting interval. After the setting, the switch periodically sends onlineusers' accounting information to the TACACS server at the set interval.z The real-time accounting interval must be a multiple of 3.z The setting of real-time accounting interval somewhat depends on the performanceof the TACACS client and server devices: A shorter interval requires higher deviceperformance.2.4 Displaying and Maintaining AAAAfter the above configurations, you can execute the display commands in any view toview the configuration result and operation status of AAA, RADIUS and HWTACACSand verify your configuration.You can use the reset command in user view to clear the corresponding statistics.
