Operation Manual – HWPingH3C S3100 Series Ethernet Switches Chapter 1 HWPing Configuration1-20Operation Command DescriptionEnable the HWPing clientto send Trap messagessend-trap { all |{ probefailure |testcomplete |testfailure }* }RequiredBy default, Trap sendingis disabled.Configure the number ofconsecutive unsuccessfulHWPing tests before Trapoutputtest-failtimes timesOptionalBy default, Trapmessages are sent eachtime a test fails.Configure the number ofconsecutive unsuccessfulHWPing probes beforeTrap outputprobe-failtimes timesOptionalBy default, Trapmessages are sent eachtime a probe fails.1.2.3 Displaying HWPing ConfigurationAfter the above-mentioned configuration, you can use the display commands to viewthe results of the latest test and history information.Table 1-15 Display HWPing test resultsOperation Command DescriptionDisplay test history display hwping history[ administrator-name operation-tag ]Display the results ofthe latest testdisplay hwping results[ administrator-name operation-tag ]Available in anyview.1.3 HWPing Configuration Example1.3.1 ICMP TestI. Network requirementsAn H3C S3100 series Ethernet switch serves as the HWPing client. A HWPing ICMPtest between the switch and another switch uses ICMP to test the round trip time (RTT)for packets generated by the HWPing client to travel to and back from the destinationswitch.
