Operation Manual – SNMP-RMONH3C S3100 Series Ethernet Switches Chapter 2 RMON Configuration2-6[Sysname] rmon event 1 log[Sysname] rmon event 2 trap 10.21.30.55# Add an entry numbered 2 to the extended alarm table to allow the system to calculatethe alarm variables with the (.1.3.6.1.2.1.16.1.1.1.9.1+.1.3.6.1.2.1.16.1.1.1.10.1)formula to get the numbers of all the oversize and undersize packets received byEthernet 1/0/1 that are in correct data format and sample it in every 10 seconds. Whenthe change ratio between samples reaches the rising threshold of 50, event 1 istriggered; when the change ratio drops under the falling threshold, event 2 is triggered.[Sysname] rmon prialarm 2(.1.3.6.1.2.1.16.1.1.1.9.1+.1.3.6.1.2.1.16.1.1.1.10.1) test 10 changeratiorising_threshold 50 1 falling_threshold 5 2 entrytype forever owner user1# Display the RMON extended alarm entry numbered 2.[Sysname] display rmon prialarm 2Prialarm table 2 owned by user1 is VALID.Samples type : changeratioVariable formula : (.1.3.6.1.2.1.16.1.1.1.9.1+.1.3.6.1.2.1.16.1.1.1.10.1)Description : testSampling interval : 10(sec)Rising threshold : 100(linked with event 1)Falling threshold : 10(linked with event 2)When startup enables : risingOrFallingAlarmThis entry will exist : forever.Latest value : 0
