Operation Manual – SSHH3C S3100 Series Ethernet Switches Chapter 1 SSH Configuration1-8Table 1-4 Follow these steps to configure SSH management functions:To do... Use the command... RemarksEnter system view system-view —Set the SSHauthentication timeouttimessh server timeoutsecondsOptionalBy default, the SSHauthentication timeout time is 60seconds.Set the number of SSHauthentication retryattemptsssh serverauthentication-retries timesOptionalBy default, the number of SSHauthentication retry attempts is3.Set the RSA server keyupdate intervalssh serverrekey-interval hoursOptionalBy default, the system does notupdate the RSA server keys.Configure a loginheader header shell textOptionalBy default, no login header isconfigured.Caution:z You can configure a login header only when the service type is stelnet. Forconfiguration of service types, refer to Specifying a Service Type for an SSH User.z For details of the header command, refer to the corresponding section in LoginCommand.z Currently, only the S3100-EI series support the ssh server rekey-intervalcommand.1.3.3 Configuring the SSH Server to Be Compatible with SSH1 ClientsFollow these steps to configure the SSH server to be compatible with SSH1 clients:To do... Use the command... RemarksEnter system view system-view —Configure the SSH serverto be compatible withSSH1 clientsssh servercompatible-ssh1xenableOptionalBy default, the SSH server iscompatible with SSH1 clients.
