Operation Manual – PoE-PoE ProfileH3C S3100 Series Ethernet Switches Chapter 2 PoE Profile Configuration2-1Chapter 2 PoE Profile Configuration2.1 Introduction to PoE ProfileOn a large-sized network or a network with mobile users, to help networkadministrators to monitor the PoE features of the switch, S3100 series Ethernetswitches provide the PoE profile features. A PoE profile is a set of PoE configurations,including multiple PoE features.Features of PoE profile:z Various PoE profiles can be created. PoE policy configurations applicable todifferent user groups are stored in the corresponding PoE profiles. These PoEprofiles can be applied to the ports used by the corresponding user groups.z When users connect a PD to a PoE-profile-enabled port, the PoE configurations inthe PoE profile will be enabled on the port.2.2 PoE Profile Configuration2.2.1 Configuring PoE ProfileTable 2-1 Configure PoE profileOperation Command DescriptionEnter system view system-view —Create a PoE profile and enterPoE profile viewpoe-profileprofilenameRequiredIf the PoE file is created,you will enter PoE profileview directly through thecommand.Enable the PoEfeature on a port poe enable RequiredDisabled by default.Configure PoE modefor Ethernet portspoe mode { signal| spare }Optionalsignal by default.Configure the PoEpriority for Ethernetportspoe priority{ critical | high |low }Optionallow by default.Configuretherelevantfeatures inPoEprofileConfigure themaximum power forEthernet portspoe max-powermax-powerOptional15,400 mW by default.Quit system view quit —
