Operation Manual – System Maintenance and DebuggingH3C S3100 Series Ethernet Switches Chapter 4 Device Management4-1Chapter 4 Device Management4.1 Introduction to Device ManagementDevice Management includes the following:z Reboot the Ethernet switchz Configure real-time monitoring of the running status of the systemz Specify the APP to be used at the next rebootz Update the Boot ROMz Identifying and Diagnosing Pluggable Transceivers4.2 Device Management Configuration4.2.1 Device Management Configuration TasksTable 4-1 Device management configuration tasksTask RemarksRebooting the Ethernet Switch OptionalScheduling a Reboot on the Switch OptionalConfiguring Real-time Monitoring of the Running Status of the System OptionalSpecifying the APP to be Used at Reboot OptionalUpgrading the Boot ROM OptionalIdentifying and Diagnosing Pluggable Transceivers Optional4.2.2 Rebooting the Ethernet SwitchYou can perform the following operation in user view when the switch is faulty or needsto be rebooted.Note:Before rebooting, the system checks whether there is any configuration change. If yes,it prompts whether or not to proceed. This prevents the system from losing theconfigurations in case of shutting down the system without saving the configurations
