Operation Manual – HWPingH3C S3100 Series Ethernet Switches Chapter 1 HWPing Configuration1-247 1018 1 0 2000-04-03 09:50:48.88 1020 1 0 2000-04-03 09:50:36.89 1020 1 0 2000-04-03 09:50:30.810 1028 1 0 2000-04-03 09:50:22.8For detailed output description, see the corresponding command manual.1.3.3 FTP TestI. Network requirementsBoth the HWPing client and the FTP server are H3C S3100 series Ethernet switches.Perform a HWPing FTP test between the two switches to test the connectivity to thespecified FTP server and the time required to upload a file to the server after theconnection is established. Both the username and password used to log in to the FTPserver are “admin”. The file to be uploaded to the server is cmdtree.txt.II. Network diagramFigure 1-4 Network diagram for the FTP testIII. Configuration procedurez Configure FTP Server (Switch B):Configure FTP server on Switch B. For specific configuration of FTP server, refer to theFTP-SFTP-TFTP part of the manual.z Configure HWPing Client (Switch A):# Enable the HWPing client. system-view[Sysname] hwping-agent enable# Create a HWPing test group, setting the administrator name to "administrator" andtest tag to "FTP".[Sysname] hwping administrator ftp# Configure the test type as ftp.[Sysname-hwping-administrator-ftp] test-type ftp# Configure the IP address of the FTP server as 10.2.2.2.[Sysname-hwping-administrator-ftp] destination-ip 10.2.2.2# Configure the FTP login username.
