Operation Manual – AAAH3C S3100 Series Ethernet Switches Chapter 2 AAA Configuration2-34A Telnet user logging into the switch by a name in the format of userid @cams belongsto the cams domain and will be authenticated according to the configuration of thecams domain.2.5.2 Local Authentication of FTP/Telnet UsersNote:The configuration procedure for local authentication of FTP users is similar to that forTelnet users. The following text only takes Telnet users as example to describe theconfiguration procedure for local authentication.I. Network requirementsIn the network environment shown in Figure 2-2, you are required to configure theswitch so that the Telnet users logging into the switch are authenticated locally.II. Network diagramFigure 2-2 Local authentication of Telnet usersIII. Configuration procedureMethod 1: Using local authentication scheme.# Enter system view. system-view# Adopt AAA authentication for Telnet users.[Sysname] user-interface vty 0 4[Sysname-ui-vty0-4] authentication-mode scheme[Sysname-ui-vty0-4] quit# Create and configure a local user named "telnet".[Sysname] local-user telnet[Sysname-luser-telnet] service-type telnet[Sysname-luser-telnet] password simple aabbcc[Sysname-luser-telnet] quit# Configure an authentication scheme for the default “system” domain.
