Operation Manual – SSHH3C S3100 Series Ethernet Switches Chapter 1 SSH Configuration1-30II. Network diagramFigure 1-13 Switch acts as server for password and RADIUS authenticationIII. Configuration procedure1) Configure the RADIUS serverNote:This document takes CAMS Version 2.10 as an example to show the basic RADIUSserver configurations required.# Add an access device.Log into the CAMS management platform and select System Management > SystemConfiguration from the navigation tree. In the System Configuration window, clickModify of the Access Device item, and then click Add to enter the Add AccessDevice window and perform the following configurations:z Specify the IP address of the switch as 192.168.1.70.z Set both the shared keys for authentication and accounting packets to expert.z Select LAN Access Service as the service type.z Specify the ports for authentication and accounting as 1812 and 1813respectively.z Select Extensible Protocol as the protocol type.z Select Standard as the RADIUS packet type.
