Operation Manual – MAC Address Table ManagementH3C S3100 Series Ethernet SwitchesChapter 1 MAC Address TableManagement1-61.2.2 Configuring a MAC Address EntryYou can add, modify, or remove a MAC address entry, remove all MAC address entriesconcerning a specific port, or remove specific type of MAC address entries (dynamic orstatic MAC address entries).You can add a MAC address entry in either system view or Ethernet port view.I. Adding a MAC address entry in system viewFollow these steps to add a MAC address entry in system view:To do… Use the command… RemarksEnter system view system-view —Add a MAC address entrymac-address { static |dynamic | blackhole }mac-address interfaceinterface-typeinterface-number vlanvlan-idRequiredCaution:z When you add a MAC address entry, the port specified by the interface argumentmust belong to the VLAN specified by the vlan argument in the command.Otherwise, the entry will not be added.z If the VLAN specified by the vlan argument is a dynamic VLAN, after a static MACaddress is added, it will become a static VLAN.II. Adding a MAC address entry in Ethernet port viewFollow these steps to add a MAC address entry in Ethernet port view:To do… Use the command… RemarksEnter system view system-view —Enter Ethernet port view interface interface-typeinterface-number —Add a MAC address entrymac-address { static |dynamic | blackhole }mac-address vlan vlan-idRequired
