Operation Manual – QoS-QoS ProfileH3C S3100 Series Ethernet Switches Chapter 2 QoS Profile Configuration2-52.3 Configuration Example2.3.1 QoS Profile Configuration ExampleI. Network requirementsAll departments of a company are interconnected through a switch. The 802.1xprotocol is used to authenticate users and control their access to network resources. Auser name is someone, and the authentication password is hello. It is connected toEthernet 1/0/1 of the switch and belongs to the test.net domain.It is required to configure a QoS profile to limit the rate of all the outbound IP packets ofthe user to 128 kbps and configuring to drop the packets exceeding the target packetrate.II. Network diagramUserSwitchNetworkAAA ServerEth1/0/1Figure 2-1 Network diagram for QoS profile configurationIII. Configuration procedure1) Configuration on the AAA server# Configure the user authentication information and the matching relationship betweenthe user name and the QoS profile. Refer to the user manual of the AAA server fordetailed configuration.2) Configuration on the switch# Configure IP addresses for the RADIUS server. system-view[Sysname] radius scheme radius1[Sysname-radius-radius1] primary authentication 10.11.1.1[Sysname-radius-radius1] primary accounting 10.11.1.2[Sysname-radius-radius1] secondary authentication 10.11.1.2
