Operation Manual – QoS-QoS ProfileH3C S3100 Series Ethernet Switches Chapter 1 QoS Configuration1-29Note:z The traffic redirecting function configured on a VLAN is only applicable to packetstagged with 802.1Q header.z Packets redirected to the CPU are not forwarded.z If the traffic is redirected to a Combo port in down state, the system automaticallyredirects the traffic to the port corresponding to the Combo port in up state. Refer tothe Port Basic Configuration module of this manual for information about Comboports.III. Configuration examplez Ethernet 1/0/1 belongs to VLAN 2 and is connected to the 10.1.1.0/24 networksegment.z Redirect all the packets from the 10.1.1.0/24 network segment to Ethernet 1/0/7.1) Method I system-view[Sysname] acl number 2000[Sysname-acl-basic-2000] rule permit source 10.1.1.1 0.0.0.255[Sysname-acl-basic-2000] quit[Sysname] interface Ethernet1/0/1[Sysname-Ethernet1/0/1] traffic-redirect inbound ip-group 2000 interfaceEthernet1/0/72) Method II system-view[Sysname] acl number 2000[Sysname-acl-basic-2000] rule permit source 10.1.1.1 0.0.0.255[Sysname-acl-basic-2000] quit[Sysname] traffic-redirect vlan 2 inbound ip-group 2000 interfaceEthernet1/0/71.4.8 Configuring Queue SchedulingRefer to section Queue Scheduling for information about queue scheduling.I. Configuration prerequisitesThe algorithm for queue scheduling to be used and the related parameters aredetermined.
