Operation Manual – QoS-QoS ProfileH3C S3100 Series Ethernet Switches Chapter 2 QoS Profile Configuration2-3Operation Command DescriptionConfigure trafficpolicingtraffic-limit inbound acl-ruletarget-rate [ burst-bucketburst-bucket-size ] [ conformcon-action ] [ exceedexceed-action ][ meter-statistic ]OptionalConfigure packetfilteringpacket-filter inboundacl-ruleOptionalRefer to the ACL moduleof this manual forinformation about packetfiltering.Configure prioritymarkingtraffic-priority inboundacl-rule { dscp dscp-value |cos cos-value |local-precedencepre-value }*Optional2.2.2 Applying a QoS ProfileYou can configure to apply a QoS profile dynamically or simply apply a QoS profilemanually.I. Configuration prerequisitesz To configure to apply a QoS profile dynamically, make sure 802.1x is enabled bothglobally and on the port, and the authentication mode is determined. Forinformation about 802.1x, refer to the 802.1x and System Guard module of thismanual.z To apply a QoS profile manually, make sure the port to which the QoS profile is tobe applied is determined.z The QoS profile to be applied is determined.II. Configuration procedureTable 2-3 Configure to apply a QoS profile dynamicallyOperation Command DescriptionEnter system view system-view —Enter Ethernet port viewinterfaceinterface-typeinterface-number—
