Operation Manual – IPv6 ManagementH3C S3100 Series Ethernet Switches Chapter 1 IPv6 Configuration1-19To do… Use the command… RemarksClear IPv6 dynamic domainname cache information reset dns ipv6 dynamic-hostClear IPv6 neighbor informationreset ipv6 neighbors [ all |dynamic | interfaceinterface-type interface-number |static ]Clear the statistics of IPv6packets reset ipv6 statisticsClear the statistics of all IPv6TCP packets reset tcp ipv6 statisticsClear the statistics of all IPv6UDP packets reset udp ipv6 statisticsAvailable inuser viewNote:The display dns domain and display dns server commands are the same as thoseof IPv4 DNS. For details about the commands, refer to DNS.1.3 IPv6 Configuration Example1.3.1 IPv6 Unicast Address ConfigurationI. Network requirementsTwo switches are directly connected through two Ethernet ports. The Ethernet portsbelong to VLAN 1. IPv6 addresses are configured for the interface Vlan-interface1 oneach switch to verify the connectivity between the two switches. The global unicastaddress of Switch A is 3001::1/64, and the global unicast address of Switch B is3001::2/64.II. Network diagramFigure 1-5 Network diagram for IPv6 address configurationIII. Configuration procedure1) Configure Switch A.
