Operation Manual – Stack-ClusterH3C S3100 Series Ethernet Switches Chapter 2 Cluster2-22Operation Command DescriptionClear the statistics on NDP ports reset ndp statistics[ interface port-list ]You can executethe resetcommand inuser view.Note:When you display the cluster topology information, the devices attached to the switchthat is listed in the backlist will not be displayed.2.4 Cluster Configuration Example2.4.1 Basic Cluster Configuration ExampleI. Network requirementsThree switches compose a cluster, where:z An S3100 series switch serves as the management device.z The rest are member devices.Serving as the management device, the S3100 switch manages the two memberdevices. The configuration for the cluster is as follows:z The two member devices connect to the management device through Ethernet1/0/2 and Ethernet 1/0/3.z The management device connects to the Internet through Ethernet 1/0/1.z Ethernet 1/0/1 belongs to VLAN 2, whose interface IP address is 163.172.55.1.z All the devices in the cluster share the same FTP server and TFTP server.z The FTP server and TFTP server use the same IP address: 63.172.55.1.z The NMS and logging host use the same IP address: 69.172.55.4.