Operation Manual – CLIH3C S3100 Series Ethernet Switches Chapter 1 CLI Configuration1-8Table 1-7 CLI viewsView AvailableoperationPromptexample Enter method Quit methodUserviewDisplayoperationstatus andstatisticalinformation ofthe switchEnter user view oncelogging into theswitch.Execute thequitcommand tolog out of theswitch.SystemviewConfiguresystemparameters[Sysname]Execute thesystem-viewcommand in userview.Execute thequit orreturncommand toreturn to userview.100 MbpsEthernet portview:[Sysname-Ethernet1/0/1]Execute the interfaceethernet command insystem view.Ethernetport viewConfigureEthernet portparameters 1000 MbpsEthernet portview:[Sysname-GigabitEthernet1/1/1]Execute the interfacegigabitethernetcommand in systemview.Aux1/0/0port (theconsoleport)viewThe S3100series do notsupportconfigurationon portAux1/0/0[Sysname-Aux1/0/0]Execute the interfaceaux 1/0/0 command insystem viewVLANviewConfigureVLANparameters[Sysname-vlan1]Execute the vlancommand in systemview.VLANinterfaceviewConfigureVLANinterfaceparameters,including themanagementVLANparameters[Sysname-Vlan-interface1]Execute the interfaceVlan-interfacecommand in systemview.LoopbackinterfaceviewConfigureloopbackinterfaceparameters[Sysname-LoopBack0]Execute the interfaceloopback commandin system view.Execute thequitcommand toreturn tosystem view.Execute thereturncommand toreturn to userview.
