Operation Manual – System Maintenance and DebuggingH3C S3100 Series Ethernet SwitchesChapter 1 Boot ROM and Host SoftwareLoading1-13Password:230 Logged in successfully[ftp] get switch.btm[ftp] byeNote:When using different FTP server software on PC, different information will be output tothe switch.Step 2: Update the Boot ROM program on the switch. boot bootrom switch.btmThis will update BootRom file on unit 1. Continue? [Y/N] yUpgrading BOOTROM, please wait...Upgrade BOOTROM succeeded!Step 3: Restart the switch. rebootNote:Before restarting the switch, make sure you have saved all other configurations thatyou want, so as to avoid losing configuration information.2) Loading host softwareLoading the host software is the same as loading the Boot ROM program, except thatthe file to be downloaded is the host software file, and that you need to use the bootboot-loader command to select the host software used for next startup of the switch.After the above operations, the Boot ROM and host software loading is completed.Pay attention to the following:z The loading of Boot ROM and host software takes effect only after you restart theswitch with the reboot command.z If the space of the Flash memory is not enough, you can delete the unused files inthe Flash memory before software downloading. For information about deletingfiles, refer to the “File System Management” part of this manual.z Ensure the power supply during software loading.
