Operation Manual – SNMP-RMONH3C S3100 Series Ethernet Switches Chapter 2 RMON Configuration2-4Operation Command DescriptionAdd anextendedalarm entryrmon prialarm entry-numberprialarm-formula prialarm-dessampling-timer { delta | absolute |changeratio } rising_thresholdthreshold-value1 event-entry1falling_threshold threshold-value2event-entry2 entrytype { forever |cycle cycle-period } [ owner text ]OptionalBefore adding anextended alarm entry,you need to use thermon event command todefine the event to bereferenced by theextended alarm entry.EnterEthernet portviewinterface interface-typeinterface-number —Add a historyentryrmon history entry-number bucketsnumber interval sampling-interval[ owner text ]OptionalAdd astatistics entryrmon statistics entry-number [ ownertext ] OptionalNote:z The rmon alarm and rmon prialarm commands take effect on existing nodes only.z For each port, only one RMON statistics entry can be created. That is, if an RMONstatistics entry is already created for a given port, you will fail to create anotherstatistics entry with a different index for the same port.2.3 Displaying RMONAfter the above configuration, you can execute the display command in any view todisplay the RMON running status, and to verify the configuration.
