Operation Manual – MAC Address AuthenticationH3C S3100 Series Ethernet Switches Chapter 1 MAC Authentication Configuration1-4Operation Command RemarksConfigure theMACauthenticationtimersmac-authentication timer{ offline-detect offline-detect-value | quietquiet-value | server-timeoutserver-timeout-value }OptionalThe defaulttimeout valuesare as follows:300 seconds foroffline detecttimer;60 seconds forquiet timer; and100 seconds forserver timeouttimerCaution:z If MAC authentication is enabled on a port, you cannot configure the maximumnumber of dynamic MAC address entries for that port (through the mac-addressmax-mac-count command), and vice versa.z If MAC authentication is enabled on a port, you cannot configure port security(through the port-security enable command) on that port, and vice versa.z You can configure MAC authentication on a port before enabling it globally.However, the configuration will not take effect unless MAC authentication is enabledglobally.1.4 MAC Address Authentication Enhanced FunctionConfiguration1.4.1 MAC Address Authentication Enhanced Function Configuration TasksTable 1-2 MAC address authentication enhanced function configuration tasksOperation Description Related sectionConfigure a Guest VLAN Optional Section 1.4.2 “Configuring aGuest VLAN”Configure the maximumnumber of MAC addressauthentication usersallowed to access a portOptionalSection 1.4.3 “Configuring theMaximum Number of MACAddress Authentication UsersAllowed to Access a Port”Configuring quiet MACfunction on a port Optional Section 1.4.4 “Configuring theQuiet MAC Function on a Port”
