Operation Manual – Smart Link-Monitor LinkH3C S3100 Series Ethernet Switches Chapter 2 Monitor Link Configuration2-42.2.3 Configuring the Uplink PortTable 2-3 Configure the uplink portOperation Command RemarksEnter system view system-view —Enter the specified Monitor Link groupviewmonitor-link groupgroup-id —Configure the specifiedlink aggregation groupas the uplink port of theMonitor Link grouplink-aggregationgroup group-id uplinkConfigure the specifiedSmart Link group asthe uplink port of theMonitor Link groupsmart-link groupgroup-id uplinkMonitorLinkgroupviewport interface-typeinterface-numberuplinkquitinterface interface-typeinterface-numberConfigurethe uplinkport for theMonitorLink groupConfigurethespecifiedEthernetport as theuplink portof theMonitorLink groupEthernetport viewport monitor-linkgroup group-id uplinkRequiredUse any of thethreeapproaches2.2.4 Configuring a Downlink PortTable 2-4 Configure a downlink portOperation Command RemarksEnter system view system-view —Enter the specified Monitor Link groupviewmonitor-link groupgroup-id Required
