Operation Manual – Voice VLANH3C S3100 Series Ethernet Switches Chapter 1 Voice VLAN Configuration1-12To do… Use the command… RemarksDisplay the ports operating in the voice VLAN display vlan vlan-id1.4 Voice VLAN Configuration Example1.4.1 Voice VLAN Configuration Example (Automatic Voice VLAN AssignmentMode)I. Network requirementsCreate a voice VLAN and configure it to operate in automatic voice VLAN assignmentmode to enable the port to which an IP phone is connected to join or exit the voiceVLAN automatically and voice traffic to be transmitted within the voice VLAN.z Create VLAN 2 and configure it as the voice VLAN, with the aging timer being 100minutes.z The IP phone sends tagged packets. It is connected to Ethernet 1/0/1, a hybridport, with VLAN 6 being its default VLAN. Set this port to operate in automaticvoice VLAN assignment mode.z You need to add a user-defined OUI address 0011-2200-000, with the mask beingffff-ff00-0000 and the description string being “test”.II. Network diagramInternetDevice AEth1/0/1VLAN2VLAN2010-1001OUI:0011-2200-0000Mask:ffff-ff00-0000Device BFigure 1-2 Network diagram for voice VLAN configuration (automatic voice VLANassignment mode)III. Configuration procedure# Create VLAN 2 and VLAN 6. system-view[DeviceA] vlan 2[DeviceA-vlan2] quit
