Operation Manual – Stack-ClusterH3C S3100 Series Ethernet Switches Chapter 2 Cluster2-26Note:z After completing the above configuration, you can execute the cluster switch-to{ member-number | mac-address H-H-H } command on the management device toswitch to member device view to maintain and manage a member device. After that,you can execute the cluster switch-to administrator command to return tomanagement device view.z In addition, you can execute the reboot member { member-number | mac-addressH-H-H } [ eraseflash ] command on the management device to reboot a memberdevice. For detailed information about these operations, refer to the precedingdescription in this chapter.z After the above configuration, you can receive logs and SNMP trap messages of allcluster members on the NMS.2.4.2 Enhanced Cluster Feature Configuration ExampleI. Network requirementsz The cluster operates properly.z Add the device with the MAC address 0001-2034-a0e5 to the cluster blacklist, thatis, prevent the device from being managed and maintained by the cluster.z Save the current cluster topology as the base topology and save it in the flash ofthe local management device in the cluster.
