Operation Manual – System Maintenance and DebuggingH3C S3100 Series Ethernet SwitchesChapter 1 Boot ROM and Host SoftwareLoading1-2Note:The loading process of the Boot ROM software is the same as that of the host software,except that during the former process, you should press “6” or and after entering the BOOT menu and the system gives different prompts. The followingtext mainly describes the Boot ROM loading process.1.2.1 BOOT MenuStarting......************************************************************ ** H3C S3100-26TP-EI-W BOOTROM, Version 506 ** ************************************************************Copyright(c) 2004-2007 Hangzhou H3C Technologies Co., Ltd.Creation date : Apr 17 2007, 10:12:36CPU Clock Speed : 200MHzBUS Clock Speed : 33MHzMemory Size : 64MBMac Address : 000fe2123456Press Ctrl-B to enter Boot Menu...Press . The system displays:Password :Note:To enter the BOOT menu, you should press within five seconds ( full startupmode ) or one second (fast startup mode) after the information “Press Ctrl-B to enterBOOT Menu...” displays. Otherwise, the system starts to extract the program; and ifyou want to enter the BOOT Menu at this time, you will have to restart the switch.
